7.6.2.1 GRANT_SYSTEM_PRIVILEGE: Granting system-level privileges

To set a system-level privilege, call the following procedure:

PROCEDURE DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE (    privilege    IN VARCHAR2,    grantee      IN VARCHAR2,    admin_option IN BOOLEAN := FALSE);

where privilege is the AQ system privilege to grant, grantee is the user or role (including PUBLIC) to which the privilege is granted, and admin_option controls whether the grantee is allowed to use this procedure to grant the system privilege to other users or roles. The options for privilege are shown here:

ENQUEUE_ANY

Users granted this privilege are allowed to enqueue messages to any queues in the database.

DEQUEUE_ANY

Users granted this privilege are allowed to dequeue messages from any queues in the database.

MANAGE_ANY

Users granted this privilege are allowed to run DBMS_AQADM calls on any schemas in the database.

TIP: Immediately after database installation, only SYS and SYSTEM have the privileges to run this program successfully. If you do not want to manage AQ from either of these schemas, you will want to grant MANAGE_ANY with the admin_option parameter set to TRUE to another schema (such as AQADMIN) and then work from there for future AQ administrative activities.

7.6.2.2 REVOKE_SYSTEM_PRIVILEGE: Revoking system-level privileges

You can revoke system privileges with the following procedure:

PROCEDURE DBMS_AQADM.REVOKE_SYSTEM_PRIVILEGE (    privilege IN VARCHAR2,    grantee   IN VARCHAR2);

where the parameters have the same meanings as for the GRANT_SYSTEM_PRIVILEGE procedure.

7.6.2.3 Example

Let's take a look at the steps a DBA will commonly take to set up a schema as an AQ administrator. First, create the user (I'll call it "WFADM" for "workflow administration") and grant the roles needed to function in the database and work as an AQ administrator:

CREATE USER WFADM IDENTIFIED BY WFADM;  GRANT CONNECT, RESOURCE, aq_administrator_role TO WFADM; 

Next, make sure that this schema can execute both of the AQ packages:

GRANT EXECUTE ON dbms_aq TO WFADM;  GRANT EXECUTE ON dbms_aqadm TO WFADM; 

Finally, give this schema the ability to work with any queues in the database:

BEGIN     DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE (        'ENQUEUE_ANY', 'WFADM', FALSE);      DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE (        'DEQUEUE_ANY', 'WFADM', FALSE); END; /

7.6.3.1 GRANT_QUEUE_PRIVILEGE: Granting queue-level privileges

To set a queue-level privilege, call the following procedure:

PROCEDURE DBMS_AQADM.GRANT_QUEUE_PRIVILEGE (    privilege    IN VARCHAR2,    queue_name   IN VARCHAR2,    grantee      IN VARCHAR2,    admin_option IN BOOLEAN := FALSE);

where privilege is the AQ system privilege to grant, queue_name is the name of the queue on which the grant is to be made, grantee is the user or role (including PUBLIC) to which the privilege is granted, and admin_option controls whether the grantee is allowed to use this procedure to grant the privilege to other users or roles.

The options for privilege are shown here:

ENQUEUE

Users granted this privilege are allowed to enqueue messages to this queue.

DEQUEUE

Users granted this privilege are allowed to dequeue messages from this queue.

ALL

Both ENQUEUE and DEQUEUE

7.6.3.2 REVOKE_QUEUE_PRIVILEGE: Revoking queue-level privileges

You can revoke queue privileges with the following procedure:

PROCEDURE DBMS_AQADM.REVOKE_QUEUE_PRIVILEGE (    privilege  IN VARCHAR2,    queue_name IN VARCHAR2,    grantee    IN VARCHAR2);

where the parameters have the same meaning as for the GRANT_QUEUE_PRIVILEGE procedure.

7.6.3.3 Example

Queue-level grants are crucial when you want to set up individual schemas to be able to only enqueue or only dequeue for specific queues. Suppose, for example, that I am constructing a system to support universal health care in the United States. I want doctors to be able to enqueue a record of services performed, but I don't want them to be able to dequeue that information. I want my administrators to be able to dequeue that information, but not to enqueue it. I might execute a block like this:

BEGIN    DBMS_AQADM.GRANT_QUEUE_PRIVILEGE (       'DEQUEUE', 'FEELGOOD_service_record_q', 'Doctor_Role', FALSE);       DBMS_AQADM.GRANT_QUEUE_PRIVILEGE(       'ENQUEUE', 'FEELGOOD_service_record_q', 'Admin_Role', FALSE); END; /

7.6.4.1 Rule-based subscribers

Oracle AQ has always let you define subscriber lists and add subscribers with the DBMS_AQADM.ADD_SUBSCRIBER procedure. The 8.1 implementation adds another parameter to this procedure, allowing you to associate a rule with a subscriber. Here is the new procedure header:

PROCEDURE DBMS_AQADM.ADD_SUBSCRIBER (    queue_name  IN  VARCHAR2,    subscriber  IN  sys.aq$_agent,    rule        IN  VARCHAR2 DEFAULT NULL);

where queue_name is the name of the queue in which the subscriber is interested, subscriber is an object instance of type SYS.AQ$_AGENT that identifies the agent to be added to the subscription list, and rule is a string that contains a conditional expression.

The rule must be a string that is evaluated dynamically to a Boolean value: TRUE, FALSE, or NULL. The string may contain references to message properties (fields in the DBMS_AQ.MESSAGE_PROPERTIES_T record type), to attributes of the queue's payload (object payloads only, not RAW) and to PL/SQL functions (either built-in or your own).

Let's go over some rules and then look at some examples. The rule must conform to the following guidelines:

• The only message properties currently supported are PRIORITY and CORRID (correlation identifier).

• If you wish to reference attributes of the object payload in a queue, you must prefix each attribute with a qualifier of TAB.USER_DATA (a hardcoded string).

• The maximum length of the rule parameter is 4000 characters.

• Any PL/SQL functions you reference in the rule must be callable from within the WHERE clause of a SQL statement.

• If you need to surround a literal with single quotes inside the rule, then you must use two single quotes in sequence.

The following examples should clarify these rules and their application:

1. Add a subscriber to the War Criminals Prosecution queue who is interested only in dequeuing messages of top priority:

DECLARE    most_urgent SYS.AQ$_AGENT :=       SYS.AQ$_AGENT ('ChiefProsecutor', 'Cases_queue'); BEGIN    DBMS_AQADM.ADD_SUBSCRIBER (       'Cases_queue', most_urgent, 'PRIORITY = 1'); END;

2. The War Crimes Tribunal has just hired a junior prosecutor to handle cases involving atrocities in Latin America. The following block of code ensures that this agent will only handle low-priority cases from that region. Notice the use of multiple single quotes to ensure that the literal for region name is passed through properly:

DECLARE    back_burner SYS.AQ$_AGENT :=       SYS.AQ$_AGENT ('JuniorProsecutor', 'Cases_queue'); BEGIN    DBMS_AQADM.ADD_SUBSCRIBER (       'Cases_queue', back_burner,        'PRIORITY > 3 AND CORRID = ''LATIN AMERICA'''); END;_

3. Big changes in the year 2015! Even as the fast food chains come to dominate the delivery of food to the world's population, the percentage of humans living in hunger increases. A worldwide protest movement rises up -- and the three biggest chains are purchased by the United Nations. Now all that technology and food delivery capability will be used directly to make sure that no one in the world starves. But wait -- we need to set up subscribers to receive orders for food in their specific regions. So I set up an object type to be used as the queue payload:

CREATE TYPE food_order_t AS OBJECT (    country VARCHAR2(100),    region VARCHAR2(100),    child_population NUMBER,    adult_population NUMBER    );

I can now define a subscriber in the North American Midwest who is responsible for the distribution of food within an area that has a child population of more than 10,000:

DECLARE    lotsa_kids SYS.AQ$_AGENT  :=       SYS.AQ$_AGENT ('FoodManager', 'Food_distribution_queue'); BEGIN    DBMS_AQADM.ADD_SUBSCRIBER (       'Food_distribution_queue',        lotsa_kids,        'TAB.USER_DATA.country = ''USER'' AND        TAB.USER_DATA.region = ''MIDWEST'' AND        TAB.USER_DATA.child_population > 10000'); END;_

7.6.4.2 LISTEN: Listening for messages

Oracle8 i adds a procedure to DBMS_AQ that you can use to listen for the enqueuing of a message to which one or more agents have subscribed. The header for this program is as follows:

PROCEDURE DBMS_AQ.LISTEN (    agent_list IN  AQ$_AGENT_LIST_T,    wait       IN  BINARY_INTEGER DEFAULT DBMS_AQ.FOREVER,     agent      OUT SYS.AQ$_AGENT);

where agent_list is an index-by table defined in DBMS_AQ as follows:

TYPE DBMS_AQ.AQ$_AGENT_LIST_T IS TABLE of AQ$_AGENT      INDEXED BY BINARY_INTEGER;

wait is the number of seconds the LISTEN procedure will wait or block as it waits for a message (the default is forever), and agent is the value returned by the procedure: an object.

The DBMS_AQ.LISTEN procedure is very similar to DBMS_ALERT.WAITANY. You can call the procedure to monitor one or more queues, which are identified by the address field of the agent object (only local queues are supported as addresses). When you call DBMS_AQ.LISTEN, your session will be blocked until a message is available in one of the queues, or until the wait time expires.

If a message is available for consumption on one of the queues indicated by the agents in agent_list , then that address will be returned in the agent OUT parameter. A successful completion of this call to DBMS_AQ.LISTEN does not, however, dequeue the message. Once you retrieve the agent, you must obtain the queue name and then issue an explicit DBMS_AQ.DEQUEUE call against that queue to get the payload.

If there are no messages found when the wait time expires in a call to DBMS_AQ.LISTEN, then the following error is raised:

ORA-25254: time-out in LISTEN while waiting for a message

Let's look at an example. All the members of my family love ice cream and we each have our own favorite flavor. We have installed Oracle8 i on our local ice cream truck, along with a cellular modem. Whenever Sally, who drives the truck, is coming into our neighborhood, she will queue up messages indicating the flavors available that day. Every hot summer afternoon, we issue a call to DBMS_AQ.LISTEN and wait to hear who will have first (and hopefully not only) dibs on the ice cream. So let's walk through the code needed to accomplish this task (all to be found in the aqlisten.sql file on the companion disk).

Here is the payload for my queue:

/* Filename on companion disk: aqlisten.sql */ CREATE TYPE ice_cream_t IS OBJECT (     flavor VARCHAR2(30),    calories INTEGER); /

Then I create a package to hold the queue-related data structures and also initialize my queue. The package specification contains a named constant for the queue name and the list of subscribers I will use in my call to DBMS_AQ.LISTEN:

CREATE OR REPLACE PACKAGE aqlisten IS    qname CONSTANT CHAR(15) := 'ice_cream_queue';    tell_us DBMS_AQ.AQ$_AGENT_LIST_T; END; /

The package body defines a procedure that I use to define subscribers for my queue and also build the listen list:

PROCEDURE subscribe_me (    name IN VARCHAR2, flavor IN VARCHAR2) IS     tell_me SYS.AQ$_AGENT        := SYS.AQ$_AGENT (name, qname, NULL); BEGIN    DBMS_AQADM.ADD_SUBSCRIBER (       qname,       tell_me,       'TAB.USER_DATA.flavor = ''' || flavor || '''');     tell_us (NVL(tell_us.LAST,0)+1) := tell_me; END;

Notice that each subscriber has a rule associated with it: his or her favorite flavor of ice cream. The assignment to the tell_us index-by table always adds to the end of the table.

There is nothing else in the package body but the initialization section. This section contains code that will be executed for each session the first time that session references any element in the package. In the case of aqlisten, there are only two ways to reference it: use aqlisten.qname or the aqlisten.tell_us table. The first step in the initialization is to clean out any old versions of my queue table and queue:

DBMS_AQADM.STOP_QUEUE (qname, TRUE, TRUE, FALSE); DBMS_AQADM.DROP_QUEUE (qname); DBMS_AQADM.DROP_QUEUE_TABLE ('ice_cream_qtable');

Then I can create the elements anew, making sure that they are defined as I need them for the example:

DBMS_AQADM.CREATE_QUEUE_TABLE (    queue_table => 'ice_cream_qtable',    queue_payload_type => 'ice_cream_t',    multiple_consumers => TRUE,    compatible => '8.1');   DBMS_AQADM.CREATE_QUEUE (qname, 'ice_cream_qtable');  DBMS_AQADM.START_QUEUE (qname);

Notice that I specify the ice cream queue table as an 8.1 queue table able to support multiple consumers. Great! Now I can define my subscribers and their favorite flavors and confirm the number of subscribers in my list:

subscribe_me ('Steven', 'ROCKY ROAD'); subscribe_me ('Veva', 'BUTTER PECAN'); subscribe_me ('Chris', 'VANILLA'); subscribe_me ('Eli', 'MINT CHOCOLATE CHIP');  DBMS_OUTPUT.PUT_LINE (tell_us.COUNT || ' subscribers in tell_us.');

Now I am ready to try it out. I create a procedure that allows me to enqueue a particular flavor and then listen for the corresponding agent. I then use DBMS_OUTPUT to confirm the agent by name and queue:

CREATE OR REPLACE PROCEDURE tasty_treat_time (    flavor IN VARCHAR2) IS    tell_me SYS.AQ$_AGENT;    queueOpts DBMS_AQ.ENQUEUE_OPTIONS_T;    msgProps DBMS_AQ.MESSAGE_PROPERTIES_T;    mmmmmm ice_cream_t;    msgid RAW(16);    BEGIN    queueopts.visibility := DBMS_AQ.IMMEDIATE;     /* Populate the object. */    mmmmmm := ice_cream_t (flavor, 10);     DBMS_AQ.ENQUEUE (       aqlisten.qname, queueOpts, msgProps, mmmmmm, msgid);           DBMS_AQ.LISTEN (aqlisten.tell_us, 0, tell_me);        DBMS_OUTPUT.PUT_LINE (       'Message for ' || tell_me.name ||        ' in queue ' || tell_me.address); END; /  

When I run this script I see the following output:

BEGIN       tasty_treat_time ('MINT CHOCOLATE CHIP');    tasty_treat_time ('VANILLA');    tasty_treat_time ('STRAWBERRY'); EXCEPTION    WHEN OTHERS    THEN       DBMS_OUTPUT.PUT_LINE (SQLERRM);    END; /  Message for ELI in queue SCOTT.ICE_CREAM_QUEUE Message for CHRIS in queue SCOTT.ICE_CREAM_QUEUE ORA-24033: no recipients for message

TIP: If the address (queue) for an agent is a multiconsumer queue, then you must supply the agent name. If the queue is a single-consumer queue, then you must leave the agent name unspecified or NULL.