 |  |
| |
A halfway house between complete encryption and none at all is digest authentication. The idea is that a one-way hash, or digest, is calculated from a password and various other bits of information. Rather than sending the lightly encoded password, as is done in basic authentication, the digest is sent. At the other end, the same function is calculated: if the numbers are not identical, something is wrong — and in this case, since all other factors should be the same, the "something" must be the password.
Digest authentication is applied in Apache to improve the security of passwords. MD5 is a cryptographic hash function written by Ronald Rivest and distributed free by RSA Data Security; with its help, the client and server use the hash of the password and other stuff. The point of this is that although many passwords lead to the same hash value, there is a very small chance that a wrong password will give the right hash value, if the hash function is intelligently chosen; it is also very difficult to construct a password leading to the same hash value (which is why these are sometimes referred to as one-way hashes). The advantage of using the hash value is that the password itself is not sent to the server, so it isn't visible to the Bad Guys. Just to make things more tiresome for them, MD5 adds a few other things into the mix: the URI, the method, and a nonce. A nonce is simply a number chosen by the server and told to the client, usually different each time. It ensures that the digest is different each time and protects against replay attacks.[26] The digest function looks like this:
[26]This is a method in which the Bad Guy simply monitors the Good Guy's session and reuses the headers for her own access. If there were no nonce, this would work every time!
MD5(MD5(<password>)+":"+<nonce>+":"+MD5(<method>+":"+<uri>))
MD5 digest authentication can be invoked with the following line:
AuthType Digest
This plugs a nasty hole in the Internet's security. As we saw earlier — and almost unbelievably — the authentication procedures discussed up to now send the user's password in barely encoded text across the Web. A Bad Guy who intercepts the Internet traffic then knows the user's password. This is a Bad Thing.
You can either use SSL (see Chapter 11) to encrypt the password or Digest Authentication. Digest authentication works this way:
The client requests a URL.
Because that URL is protected, the server replies with error 401, "Authentication required," and among the headers, it sends a nonce.
The client combines the user's password, the nonce, the method, and the URL, as described previously, then sends the result back to the server. The server does the same thing with the hash of the user's password retrieved from the password file and checks that its result matches.[27]
[27]Which is why MD5 is applied to the password, as well as to the whole thing: the server then doesn't have to store the actual password, just a digest of it.
A different nonce is sent the next time, so that the Bad Guy can't use the captured digest to gain access.
MD5 digest authentication is implemented in Apache, using mod_auth_digest, for two reasons. First, it provides one of the two fully compliant reference HTTP 1.1 implementations required for the standard to advance down the standards track; second, it provides a test bed for browser implementations. It should only be used for experimental purposes, particularly since it makes no effort to check that the returned nonce is the same as the one it chose in the first place.[28] This makes it susceptible to a replay attack.
[28]It is unfortunate that the nonce must be returned as part of the client's digest authentication header, but since HTTP is a stateless protocol, there is little alternative. It is even more unfortunate that Apache simply believes it! An obvious way to protect against this is to include the time somewhere in the nonce and to refuse nonces older than some threshold.
The httpd.conf file is as follows:
User webuser Group webgroup ServerName www.butterthlies.com ServerAdmin [email protected] DocumentRoot /usr/www/APACHE3/site.digest/htdocs/customers ErrorLog /usr/www/APACHE3/site.digest/logs/customers/error_log TransferLog /usr/www/APACHE3/site.digest/logs/customers/access_log ScriptAlias /cgi-bin /usr/www/APACHE3/cgi-bin <VirtualHost sales.butterthlies.com> ServerAdmin [email protected] DocumentRoot /usr/www/APACHE3/site.digest/htdocs/salesmen ServerName sales.butterthlies.com ErrorLog /usr/www/APACHE3/site.digest/logs/salesmen/error_log TransferLog /usr/www/APACHE3/site.digest/logs/salesmen/access_log ScriptAlias /cgi-bin /usr/www/APACHE3/cgi-bin <Directory /usr/www/APACHE3/site.digest/htdocs/salesmen> AuthType Digest AuthName darkness AuthDigestFile /usr/www/APACHE3/ok_digest/sales require valid-user #require group cleaners </Directory> </VirtualHost>
Go to the Config file (see Chapter 1 ). If the line:
Module digest_module mod_digest.o
is commented out, uncomment it and remake Apache as described previously. Go to the Apache support directory, and type:
% make htdigest % cp htdigest /usr/local/bin
The command-line syntax for htdigest is:
% htdigest [-c]passwordfile realm user
Go to /usr/www/APACHE3 (or some other appropriate spot) and make the ok_digest directory and contents:
% mkdir ok_digest % cd ok_digest % htdigest -c sales darkness bill Adding password for user bill in realm darkness. New password: theft Re-type new password: theft % htdigest sales darkness ben ... % htdigest sales darkness sonia ... % htdigest sales darkness daphne ...
Digest authentication can, in principle, also use group authentication. In earlier editions we had to report that none of it seemed to work with the then available versions of MSIE or Netscape. However, Netscape v6.2.3 and MSIE 6.0.26 seemed happy enough, though we have not tested them thoroughly. Include the line:
LogLevel debug
in the Config file, and check the error log for entries such as the following:
client used wrong authentication scheme: Basic for \
Whether a webmaster used this facility might depend on whether he could control which browsers the clients used.
This directive enables the generation of Content-MD5 headers as defined in RFC1864 and RFC2068.
ContentDigest on|off Default: ContentDigest off server config, virtual host, directory, .htaccess
MD5, as described earlier in this chapter, is an algorithm for computing a "message digest" (sometimes called "fingerprint") of arbitrary-length data, with a high degree of confidence that any alterations in the data will be reflected in alterations in the message digest. The Content-MD5 header provides an end-to-end message integrity check (MIC) of the entity body. A proxy or client may check this header for detecting accidental modification of the entity body in transit. See the following example header:
Content-MD5: AuLb7Dp1rqtRtxz2m9kRpA==
Note that this can cause performance problems on your server since the message digest is computed on every request (the values are not cached).
Content-MD5 is only sent for documents served by the core and not by any module. For example, SSI documents, output from CGI scripts, and byte-range responses do not have this header.
|  | |
| 5.10. DBM Files on Unix |  | 5.12. Anonymous Access |
Copyright © 2003 O'Reilly & Associates. All rights reserved.