5.2. Pattern-Matching Operators

Zoologically speaking, Perl's pattern-matching operators function as a kind of cage for regular expressions, to keep them from getting out. This is by design; if we were to let the regex beasties wander throughout the language, Perl would be a total jungle. The world needs its jungles, of course--they're the engines of biological diversity, after all--but jungles should stay where they belong. Similarly, despite being the engines of combinatorial diversity, regular expressions should stay inside pattern match operators where they belong. It's a jungle in there.

As if regular expressions weren't powerful enough, the m// and s/// operators also provide the (likewise confined) power of double-quote interpolation. Since patterns are parsed like double-quoted strings, all the normal double-quote conventions will work, including variable interpolation (unless you use single quotes as the delimiter) and special characters indicated with backslash escapes. (See "Specific Characters" later in this chapter.) These are applied before the string is interpreted as a regular expression. (This is one of the few places in the Perl language where a string undergoes more than one pass of processing.) The first pass is not quite normal double-quote interpolation, in that it knows what it should interpolate and what it should pass on to the regular expression parser. So, for instance, any $ immediately followed by a vertical bar, closing parenthesis, or the end of the string will be treated not as a variable interpolation, but as the traditional regex assertion meaning end-of-line. So if you say:

$foo = "bar";
/$foo$/;

/bar$/;

You should also know that interpolating variables into a pattern slows down the pattern matcher, because it feels it needs to check whether the variable has changed, in case it has to recompile the pattern (which will slow it down even further). See "Variable Interpolation" later in this chapter.

The tr/// transliteration operator does not interpolate variables; it doesn't even use regular expressions! (In fact, it probably doesn't belong in this chapter at all, but we couldn't think of a better place to put it.) It does share one feature with m// and s///, however: it binds to variables using the =~ and !~ operators.

The =~ and !~ operators, described in Chapter 3, "Unary and Binary Operators", bind the scalar expression on their lefthand side to one of three quote-like operators on their right: m// for matching a pattern, s/// for substituting some string for a substring matched by a pattern, and tr/// (or its synonym, y///) for transliterating one set of characters to another set. (You may write m// as //, without the m, if slashes are used for the delimiter.) If the righthand side of =~ or !~ is none of these three, it still counts as a m// matching operation, but there'll be no place to put any trailing modifiers (see "Pattern Modifiers" later), and you'll have to handle your own quoting:

print "matches" if $somestring =~ $somepattern;

print "matches" if $somestring =~ m/$somepattern/;

Apart from the m// and s/// operators, regular expressions show up in two other places in Perl. The first argument to the split function is a special match operator specifying what not to return when breaking a string into multiple substrings. See the description and examples for split in Chapter 29, "Functions". The qr// ("quote regex") operator also specifies a pattern via a regex, but it doesn't try to match anything (unlike m//, which does). Instead, the compiled form of the regex is returned for future use. See "Variable Interpolation" for more information.

You apply one of the m//, s///, or tr/// operators to a particular string with the =~ binding operator (which isn't a real operator, just a kind of topicalizer, linguistically speaking). Here are some examples:

$haystack =~ m/needle/                # match a simple pattern
$haystack =~  /needle/                # same thing

$italiano =~ s/butter/olive oil/      # a healthy substitution

$rotate13 =~ tr/a-zA-Z/n-za-mN-ZA-M/  # easy encryption (to break)

/new life/ and              # search in $_ and (if found)
    /new civilizations/     #    boldly search $_ again

s/sugar/aspartame/          # substitute a substitute into $_

tr/ATCG/TAGC/               # complement the DNA stranded in $_

"onshore" =~ s/on/off/;      # WRONG: compile-time error

if ((lc $magic_hat->fetch_contents->as_string) =~ /rabbit/) {
    print "Nyaa, what's up doc?\n";
}
else {
    print "That trick never works!\n";
}

if ($song !~ /words/) {
    print qq/"$song" appears to be a song without words.\n/;
}

$path =~ s#/tmp#/var/tmp/scratch#;

if ($dir =~ m[/bin]) {
    print "No binary directories please.\n";
}

s(egg)<larva>;
s{larva}{pupa};
s[pupa]/imago/;

s (egg)   <larva>;
s {larva} {pupa};
s [pupa]  /imago/;

"hot cross buns" =~ /cross/;
print "Matched: <$`> $& <$'>\n";    # Matched: <hot > cross < buns>
print "Left:    <$`>\n";            # Left:    <hot >
print "Match:   <$&>\n";            # Match:   <cross>
print "Right:   <$'>\n";            # Right:   < buns>

$_ = "Bilbo Baggins's birthday is September 22";
/(.*)'s birthday is (.*)/;
print "Person: $1\n";
print "Date: $2\n";

[3] Without the parentheses, the lower-precedence lc would have applied to the whole pattern match instead of just the method call on the magic hat object.

[4] Not $0, though, which holds the name of your program.

Once Perl sees that you need one of $`, $&, or $' anywhere in the program, it provides them for every pattern match. This will slow down your program a bit. Perl uses a similar mechanism to produce $1, $2, and so on, so you also pay a price for each pattern that contains capturing parentheses. (See "Clustering" to avoid the cost of capturing while still retaining the grouping behavior.) But if you never use $`$&, or $', then patterns without capturing parentheses will not be penalized. So it's usually best to avoid $`, $&, and $' if you can, especially in library modules. But if you must use them once (and some algorithms really appreciate their convenience), then use them at will, because you've already paid the price. $& is not so costly as the other two in recent versions of Perl.

5.2.1. Pattern Modifiers

We'll discuss the individual pattern-matching operators in a moment, but first we'd like to mention another thing they all have in common, modifiers.

Immediately following the final delimiter of an m//, s///, qr//, or tr/// operator, you may optionally place one or more single-letter modifiers, in any order. For clarity, modifiers are usually written as "the /o modifier" and pronounced "the slash oh modifier", even though the final delimiter might be something other than a slash. (Sometimes people say "flag" or "option" to mean "modifier"; that's okay too.)

Some modifiers change the behavior of the individual operator, so we'll describe those in detail later. Others change how the regex is interpreted, so we'll talk about them here. The m//, s///, and qr// operators[5] all accept the following modifiers after their final delimiter:

[5] The tr/// operator does not take regexes, so these modifiers do not apply.

The /i modifier says to match both upper- and lowercase (and title case, under Unicode). That way /perl/i would also match the strings "PROPERLY" or "Perlaceous" (amongst other things). A use locale pragma may also have some influence on what is considered to be equivalent. (This may be a negative influence on strings containing Unicode.)

The /s and /m modifiers don't involve anything kinky. Rather, they affect how Perl treats matches against a string that contains newlines. But they aren't about whether your string actually contains newlines; they're about whether Perl should assume that your string contains a single line (/s) or multiple lines (/m), because certain metacharacters work differently depending on whether they're expected to behave in a line-oriented fashion or not.

Ordinarily, the metacharacter "." matches any one character except a newline, because its traditional meaning is to match characters within a line. With /s, however, the "." metacharacter can also match a newline, because you've told Perl to ignore the fact that the string might contain multiple newlines. (The /s modifier also makes Perl ignore the deprecated $* variable, which we hope you too have been ignoring.) The /m modifier, on the other hand, changes the interpretation of the ^ and $ metacharacters by letting them match next to newlines within the string instead of considering only the ends of the string. See the examples in the section Section 5.6, "Positions" later in this chapter.

The /o modifier controls pattern recompilation. Unless the delimiters chosen are single quotes (m'PATTERN', s'PATTERN'REPLACEMENT', or qr'PATTERN'), any variables in the pattern will be interpolated (and may cause the pattern to be recompiled) every time the pattern operator is evaluated. If you want such a pattern to be compiled once and only once, use the /o modifier. This prevents expensive run-time recompilations; it's useful when the value you are interpolating won't change during execution. However, mentioning /o constitutes a promise that you won't change the variables in the pattern. If you do change them, Perl won't even notice. For better control over recompilation, use the qr// regex quoting operator. See "Variable Interpolation" later in this chapter for details.

The /x is the expressive modifier: it allows you to exploit whitespace and explanatory comments in order to expand your pattern's legibility, even extending the pattern across newline boundaries.

Er, that is to say, /x modifies the meaning of the whitespace characters (and the # character): instead of letting them do self-matching as ordinary characters do, it turns them into metacharacters that, oddly, now behave as whitespace (and comment characters) should. Hence, /x allows spaces, tabs, and newlines for formatting, just like regular Perl code. It also allows the # character, not normally special in a pattern, to introduce a comment that extends through the end of the current line within the pattern string.[6] If you want to match a real whitespace character (or the # character), then you'll have to put it into a character class, or escape it with a backslash, or encode it using an octal or hex escape. (But whitespace is normally matched with a \s* or \s+ sequence, so the situation doesn't arise often in practice.)

[6] Be careful not to include the pattern delimiter in the comment--because of its "find the end first" rule, Perl has no way of knowing you didn't intend to terminate the pattern at that point.

Taken together, these features go a long way toward making traditional regular expressions a readable language. In the spirit of TMTOWTDI, there's now more than one way to write a given regular expression. In fact, there's more than two ways:

m/\w+:(\s+\w+)\s*\d+/;       # A word, colon, space, word, space, digits.

m/\w+: (\s+ \w+) \s* \d+/x;  # A word, colon, space, word, space, digits.

m{
    \w+:                     # Match a word and a colon.

    (                        # (begin group)
         \s+                 # Match one or more spaces.
         \w+                 # Match another word.
    )                        # (end group)
    \s*                      # Match zero or more spaces.
    \d+                      # Match some digits
}x;

# Find duplicate words in paragraphs, possibly spanning line boundaries.
#   Use /x for space and comments, /i to match both `is'
#   in "Is is this ok?", and use /g to find all dups.
$/ = "";        # "paragrep" mode
while (<>) {
    while ( m{
                \b            # start at a word boundary
                (\w\S+)       # find a wordish chunk
                (
                    \s+       # separated by some whitespace
                    \1        # and that chunk again
                ) +           # repeat ad lib
                \b            # until another word boundary
             }xig
         )
    {
        print "dup word '$1' at paragraph $.\n";
    }
}

dup word 'that' at paragraph 100

5.2.2. The m// Operator (Matching)

EXPR =~ m/PATTERN/cgimosx
EXPR =~ /PATTERN/cgimosx
EXPR =~ ?PATTERN?cgimosx
m/PATTERN/cgimosx
/PATTERN/cgimosx
?PATTERN?cgimosx

If PATTERN evaluates to a null string, either because you specified it that way using // or because an interpolated variable evaluated to the empty string, the last successfully executed regular expression not hidden within an inner block (or within a split, grep, or map) is used instead.

In scalar context, the operator returns true (1) if successful, false ("") otherwise. This form is usually seen in Boolean context:

if ($shire =~ m/Baggins/) { ... }  # search for Baggins in $shire
if ($shire =~ /Baggins/)  { ... }  # search for Baggins in $shire

if ( m#Baggins# )         { ... }  # search right here in $_
if ( /Baggins/ )          { ... }  # search right here in $_

if (($key,$value) = /(\w+): (.*)/) { ... }

Table 5.1. m// Modifiers

The first five modifiers apply to the regex and were described earlier. The last two change the behavior of the match operation itself. The /g modifier specifies global matching--that is, matching as many times as possible within the string. How it behaves depends on context. In list context, m//g returns a list of all matches found. Here we find all the places someone mentioned "perl", "Perl", "PERL", and so on:

if (@perls = $paragraph =~ /perl/gi) {
    printf "Perl mentioned %d times.\n", scalar @perls;
}

$string = "password=xyzzy verbose=9 score=0";

%hash = (password => "xyzzy", verbose => 9, score => 0);

%hash = $string =~ /(\w+)=(\w+)/g;

Used in scalar context, the /g modifier indicates a progressive match, which makes Perl start the next match on the same variable at a position just past where the last one stopped. The \G assertion represents that position in the string; see Section 5.6, "Positions" later in this chapter for a description of \G. If you use the /c (for "continue") modifier in addition to /g, then when the /g runs out, the failed match doesn't reset the position pointer.

If a ? is the delimiter, as in ?PATTERN?, this works just like a normal /PATTERN/ search, except that it matches only once between calls to the reset operator. This can be a convenient optimization when you want to match only the first occurrence of the pattern during the run of the program, not all occurrences. The operator runs the search every time you call it, up until it finally matches something, after which it turns itself off, returning false until you explicitly turn it back on with reset. Perl keeps track of the match state for you.

The ?? operator is most useful when an ordinary pattern match would find the last rather than the first occurrence:

open DICT, "/usr/dict/words" or die "Can't open words: $!\n";
while (<DICT>) {
    $first = $1 if ?(^neur.*)?;
    $last  = $1 if /(^neur.*)/;
}
print $first,"\n";          # prints "neurad"
print $last,"\n";           # prints "neurypnology"

5.2.3. The s/// Operator (Substitution)

LVALUE =~ s/PATTERN/REPLACEMENT/egimosx
s/PATTERN/REPLACEMENT/egimosx

$lotr = $hobbit;           # Just copy The Hobbit
$lotr =~ s/Bilbo/Frodo/g;  #   and write a sequel the easy way.

if ($lotr =~ s/Bilbo/Frodo/) { print "Successfully wrote sequel." }
$change_count = $lotr =~ s/Bilbo/Frodo/g;

s/revision|version|release/\u$&/g;  # Use | to mean "or" in a pattern

s/version ([0-9.]+)/the $Names{$1} release/g;

If PATTERN is a null string, the last successfully executed regular expression is used instead. Both PATTERN and REPLACEMENT are subject to variable interpolation, but a PATTERN is interpolated each time the s/// operator is evaluated as a whole, while the REPLACEMENT is interpolated every time the pattern matches. (The PATTERN can match multiple times in one evaluation if you use the /g modifier.)

As before, the first five modifiers in Table 5-2 alter the behavior of the regex; they're the same as in m// and qr//. The last two alter the substitution operator itself.

Table 5.2. s/// Modifiers

The /g modifier is used with s/// to replace every match of PATTERN with the REPLACEMENT value, not just the first one found. A s///g operator acts as a global search and replace, making all the changes at once, much like list m//g, except that m//g doesn't change anything. (And s///g is not a progressive match as scalar m//g was.)

The /e modifier treats the REPLACEMENT as a chunk of Perl code rather than as an interpolated string. The result of executing that code is used as the replacement string. For example, s/([0-9]+)/sprintf("%#x", $1)/ge would convert all numbers into hexadecimal, changing, for example, 2581 into 0xb23. Or suppose that, in our earlier example, you weren't sure that you had names for all the versions, so you wanted to leave any others unchanged. With a little creative /x formatting, you could say:

s{
    version
    \s+
    (
        [0-9.]+
    )
}{
    $Names{$1}
        ? "the $Names{$1} release"
        : $&
}xge;

5.2.3.1. Modifying strings en passant

Sometimes you want a new, modified string without clobbering the old one upon which the new one was based. Instead of writing:

$lotr = $hobbit;
$lotr =~ s/Bilbo/Frodo/g;

($lotr = $hobbit) =~ s/Bilbo/Frodo/g;

You can't use a s/// operator directly on an array. For that, you need a loop. By a lucky coincidence, the aliasing behavior of for/foreach, combined with its use of $_ as the default loop variable, yields the standard Perl idiom to search and replace each element in an array:

for (@chapters) { s/Bilbo/Frodo/g }  # Do substitutions chapter by chapter.
s/Bilbo/Frodo/g for @chapters;       # Same thing.

@oldhues = ('bluebird', 'bluegrass',  'bluefish', 'the blues');
for (@newhues = @oldhues) { s/blue/red/ }
print "@newhues\n";           # prints: redbird redgrass redfish the reds

for ($string) {
    s/^\s+//;       # discard leading whitespace
    s/\s+$//;       # discard trailing whitespace
    s/\s+/ /g;      # collapse internal whitespace
}

$string = join(" ", split " ", $string);

for ($newshow = $oldshow) {
    s/Fred/Homer/g;
    s/Wilma/Marge/g;
    s/Pebbles/Lisa/g;
    s/Dino/Bart/g;
}

5.2.3.2. When a global substitution just isn't global enough

Occasionally, you can't just use a /g to get all the changes to occur, either because the substitutions have to happen right-to-left or because you need the length of $` to change between matches. You can usually do what you want by calling s/// repeatedly. However, you want the loop to stop when the s/// finally fails, so you have to put it into the conditional, which leaves nothing to do in the main part of the loop. So we just write a 1, which is a rather boring thing to do, but bored is the best you can hope for sometimes. Here are some examples that use a few more of those odd regex beasties that keep popping up:

# put commas in the right places in an integer
1 while s/(\d)(\d\d\d)(?!\d)/$1,$2/;

# expand tabs to 8-column spacing
1 while s/\t+/' ' x (length($&)*8 - length($`)%8)/e;

# remove (nested (even deeply nested (like this))) remarks
1 while s/\([^()]*\)//g;

# remove duplicate words (and triplicate (and quadruplicate...))
1 while s/\b(\w+) \1\b/$1/gi;

Paris in THE THE THE THE spring.

Paris in THE THE spring.

5.2.4. The tr/// Operator (Transliteration)

LVALUE =~ tr/SEARCHLIST/REPLACEMENTLIST/cds
tr/SEARCHLIST/REPLACEMENTLIST/cds

This operator might not appear to fit into a chapter on pattern matching, since it doesn't use patterns. This operator scans a string, character by character, and replaces each occurrence of a character found in SEARCHLIST (which is not a regular expression) with the corresponding character from REPLACEMENTLIST (which is not a replacement string). It looks a bit like m// and s///, though, and you can even use the =~ or !~ binding operators on it, so we describe it here. (qr// and split are pattern-matching operators, but you don't use the binding operators on them, so they're elsewhere in the book. Go figure.)

Transliteration returns the number of characters replaced or deleted. If no string is specified via the =~ or !~ operator, the $_ string is altered. The SEARCHLIST and REPLACEMENTLIST may define ranges of sequential characters with a dash:

$message =~ tr/A-Za-z/N-ZA-Mn-za-m/;    # rot13 encryption.

The SEARCHLIST and REPLACEMENTLIST are not variable interpolated as double-quoted strings; you may, however, use those backslash sequences that map to a specific character, such as \n or \015.

Table 5-3 lists the modifiers applicable to the tr/// operator. They're completely different from those you apply to m//, s///, or qr//, even if some look the same.

Table 5.3. tr/// Modifiers

If the /c modifier is specified, the character set in SEARCHLIST is complemented; that is, the effective search list consists of all the characters not in SEARCHLIST. In the case of Unicode, this can represent a lot of characters, but since they're stored logically, not physically, you don't need to worry about running out of memory.

The /d modifier turns tr/// into what might be called the "transobliteration" operator: any characters specified by SEARCHLIST but not given a replacement in REPLACEMENTLIST are deleted. (This is slightly more flexible than the behavior of some tr(1) programs, which delete anything they find in SEARCHLIST, period.)

If the /s modifier is specified, sequences of characters converted to the same character are squashed down to a single instance of the character.

If the /d modifier is used, REPLACEMENTLIST is always interpreted exactly as specified. Otherwise, if REPLACEMENTLIST is shorter than SEARCHLIST, the final character is replicated until it is long enough. If REPLACEMENTLIST is null, the SEARCHLIST is replicated, which is surprisingly useful if you just want to count characters, not change them. It's also useful for squashing characters using /s.

tr/aeiou/!/;                 # change any vowel into !
tr{/\\\r\n\b\f. }{_};        # change strange chars into an underscore

tr/A-Z/a-z/ for @ARGV;       # canonicalize to lowercase ASCII

$count = ($para =~ tr/\n//); # count the newlines in $para
$count = tr/0-9//;           # count the digits in $_

$word =~ tr/a-zA-Z//s;       # bookkeeper -> bokeper

tr/@$%*//d;                  # delete any of those
tr#A-Za-z0-9+/##cd;          # remove non-base64 chars

# change en passant
($HOST = $host) =~ tr/a-z/A-Z/;

$pathname =~ tr/a-zA-Z/_/cs; # change non-(ASCII)alphas to single underbar

tr [\200-\377]
   [\000-\177];              # strip 8th bit, bytewise

tr/AAA/XYZ/

Although variables aren't interpolated into tr///, you can still get the same effect by using evalEXPR:

$count = eval "tr/$oldlist/$newlist/";
die if $@;  # propagates exception from illegal eval contents

One more note: if you want to change your text to uppercase or lowercase, don't use tr///. Use the \U or \L sequences in a double-quoted string (or the equivalent uc and lc functions) since they will pay attention to locale or Unicode information and tr/a-z/A-Z/ won't. Additionally, in Unicode strings, the \u sequence and its corresponding ucfirst function understand the notion of titlecase, which for some languages may be distinct from simply converting to uppercase.

5.1. The Regular Expression Bestiary		5.3. Metacharacters and Metasymbols

Copyright © 2002 O'Reilly & Associates. All rights reserved.